The house’s creation

We make the BusyKids interactive house from high-quality birch plywood. Apart from laser cutting, which only makes up about 2% of production, everything is handmade. We know that what we make is intended for those we all hold most dear – our children – which is why we go out of our way to care so much and enforce a number of product inspections.

• First, the plywood is brought to the workshop. The painter checks for colour defects and cracks.

• Next comes the laser cutting; cutting the parts for a single house takes approx. 1 hour and 20 minutes.

• For the next half hour, every piece of the house is thoroughly sanded.

• Then it’s time for another inspection by the painter to see if they’re ready to be taken from the sanding bay to the paint shop.

• Next, they are varnished by hand. Every varnish that we use is water-based, making them safer for children.

• All the pieces are then left to dry, before being quality checked again.

• The multi-part components are put together, and it takes about another 30 minutes to assemble all the pieces on the six activity boards by hand. Not a single screw is used in the house’s construction; every component is riveted.

• Before it’s packaged, the final inspection is made before sending it out into the world. Our houses have now made it to more than 40 different countries.

All our toys are certified in accordance with applicable quality and safety standards (EN71-1, EN71-2, EN71-3, EN71-8, EN71-9, 1907/2006 REACH).